Pptp/L2Tp Settings - D-Link DIR-640L User Manual
Wireless n300 cloud vpn router
Hide thumbs
Also See for DIR-640L:
- User manual (122 pages) ,
- Quick install manual (13 pages) ,
- Quick installation manual (29 pages)
Table of Contents
Advertisement
Section 3 - Configuration
This page allows you to set up a VPN using either PPTP or L2TP.
PPTP/L2TP:
Check this box to enable PPTP/L2TP settings.
Name:
Enter a name for your VPN.
Connection Type:
Select PPTP or L2TP.
VPN Server IP:
Enter the IP address of the VPN server.
Remote IP Range:
Enter the remote IP range in the boxes.
Authentication
Choose PAP, CHAP, or MSCHAP v2 for your
Protocol:
authentication.
MPPE Encryption
Choose either RC4, None, 40 bit, or 128 bit to
Mode:
determine the strength level of your authentication.
Extended
If you wish to use extended authentication, choose a group from the drop-down menu.
Authentication:
L2TP Over IPSec:
Check this box to enable L2TP Over IPSec settings.
Pre-shared Key:
Manually enter ASCII passphrase in box.
D-Link DIR-640L User Manual
PPTP/L2TP Settings
50
Advertisement
Table of Contents
