Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from the most brutal environments and devastating ESD attacks with industrial‑grade shielded Ethernet cable from Ubiquiti Networks . For more details, visit www.ubnt.com/toughcable ™...
Rocket ™ Hardware Overview Antenna Connectors Port Cover Ethernet Port USB Port Note: The USB port is reserved for future use.
Page 5
Hardware Overview LEDs Power The Power LED is steady green when the RocketM is connected to a power source. Ethernet The Ethernet LED is steady green when an active Ethernet connection is made to the Ethernet Port and flashes when there is activity. Signal The first Signal LED is lit when the wireless signal strength is above ‑94 dBm, the second LED...
Rocket ™ Hardware Installation 1. Connect the RF cables to the connectors labeled Chain 0 and Chain 1 on the RocketM. 2. Slide the RocketM on to the antenna mount. (If you are mounting the RocketM on a pole, refer to the Pole-Mounting section on page 5.) Mounting on a Dish Antenna Mounting on a Sector Antenna...
Hardware Installation 3. Attach the RF cables from the RocketM to the connectors on the antenna. Connecting to a Dish Antenna Connecting to a Sector Antenna Pole‑Mounting To mount the RocketM on a pole, use the included Metal Strap and perform the following steps: 1.
Page 8
Rocket ™ 2. Straighten out the end of the Metal Strap and slide it through the back of the RocketM. 3. Wrap the Metal Strap around the pole and use a flathead screwdriver to tighten the locking mechanism by turning it clockwise.
Connecting Power over Ethernet Connecting Power over Ethernet 1. Remove the Port Cover by lifting the release latch on the bottom of the RocketM and sliding the Port Cover off. 2. Connect an Ethernet cable to the Ethernet Port and to the Ethernet port labeled POE on the PoE Adapter.
Page 10
Rocket ™ 3. Connect an Ethernet cable from your LAN to the Ethernet port labeled LAN on the PoE Adapter. 4. Connect the Power Cord to the power port on the PoE Adapter. Connect the other end of the Power Cord to a power outlet. 5.
Page 11
Accessing airOS Accessing airOS Verify connectivity in the airOS Configuration Interface. 1. Make sure that your host machine is connected via Ethernet to the RocketM. 2. Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet. 3.
Since Ubiquiti Networks equipment can be paired with a variety of antennas and cables, the Antenna Gain, Cable Loss, and Output Power fields are provided to the professional installer to assist in...
Rocket ™ Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm.
Repair or replacement in the manner provided herein shall be the sole and exclusive remedy of Buyer for breach of warranty and shall constitute fulfillment of all liabilities of UBIQUITI NETWORKS with respect to the quality and performance of the Products. UBIQUITI NETWORKS reserves the right to inspect all defective Products (which must be returned by Buyer to UBIQUITI NETWORKS factory freight prepaid).
Rocket ™ Returns In the unlikely event a defect occurs, please work through the dealer or distributor from which this product was purchased. Compliance Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.
Compliance Pour réduire le risque d’interférence aux autres utilisateurs, le type d’antenne et son gain doivent être choisies de façon que la puissance isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire pour une communication réussie. Cet appareil est conforme à la norme RSS Industrie Canada exempts de licence norme(s).
Page 18
Rocket ™ RoHS/WEEE Compliance Statement English European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams.
Page 19
Compliance Français La directive européenne 2002/96/CE exige que l’équipement sur lequel est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté avec les autres ordures ménagères. Ce symbole indique que le produit doit être éliminé dans un circuit distinct de celui pour les déchets des ménages.
UBIQUITI NETWORKS, device est conforme aux exigences [French] essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Par la présente, UBIQUITI NETWORKS déclare que ce UBIQUITI NETWORKS device, est conforme aux exigences essentielles et aux autres dispositions de la directive 1999/5/CE qui lui sont applicables.
Page 21
UBIQUITI NETWORKS device, megfelel a vonatkozó alapvetõ [Hungarian] követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Íslenska Hér me l sir UBIQUITI NETWORKS yfir ví a UBIQUITI NETWORKS device, er í samræmi vi grunnkröfur og a rar kröfur, sem ger ar eru í [Icelandic] tilskipun 1999/5/EC.
Page 22
Pour en savoir plus, rendez‑vous sur www.ubnt.com/toughcable Italiano Si consiglia di proteggere le reti dagli ambienti e dagli attacchi ESD più invasivi con il cavo Ethernet schermato‑di tipo industriale di Ubiquiti Networks. Per ulteriori informazioni, visitare il sito Web www.ubnt.com/toughcable JL022012...