Replacing Or Adding A New Hard Drive; Secure Http Login - D-Link DNS-321 User Manual

D-link dns-321 disk storage system

Hide thumbs Also See for DNS-321:

Table of Contents

Section 3 - Configuration

It is recommended that you back up your important files before replacing or adding a new hard drive to the DNS-321.

Replacing a Hard Drive:

Please make sure the power is off before replacing a hard drive. After you have installed the new drive, turn on the DNS-321 and then

connect to the Web UI. The DNS-321 will prompt you to format the new drive (Standard, RAID 1 mode) or both drives (JBOD, RAID 0

mode).

Adding a New Hard Drive:

The DNS-321 is able to work with one single hard drive under Standard mode. Please make sure the power is off before installing a

second hard drive. After you have installed the new drive, turn on the DNS-321 and then connect to the Web UI. The DNS-321 will prompt

you to format the new drive.

Note: Formatting a hard drive will erase the data stored on the hard drive. Please backup important data before formatting a hard drive.

Apart from logging into the web user interface using the normal http://192.168.69.32/, the user can also login to the web configuration

using secure https.

1) Open Internet Exporer and type https://192.168.0.32

2) Login to the DNS-321 as per normal.

D-Link DNS-321 User Manual

Replacing or Adding a New Hard Drive

Table of Contents

Show Quick Links

Table of Contents