Table of Contents
Advertisement
I
• TIMER RECORDING/PLAYBACK
• NOTES ON INTRO SCAN, DIRECT MUSIC SEARCH AND
RANDOM PROGRAMMED
PLAYBACK FUNCTIONS
• Timer Recording
1. Make sure that all power cord connections between the timer and
amplifier are properly made. No change in any of the other
connections between deck and amplifier, etc., is necessary.
2. After turning on the power to each component, select the station on
your tuner which you want to record and turn down the volume on your
amplifier. This will have no effect on the recording signal level.
Remember to set the proper recording level.
3. Set the timer to the desired times. It is advisable to set the timer to
begin recording slightly before the actual recording time, and end
slightly after the actual recording time, so that you leave some room
for later editing.
4. Set the AUTO MODE selector to the TIMER REC position.
5. The timer will send power to the amplifier, tuner and deck at the preset
time, turning all the components on and initiating the recording mode.
CAUTION:
if the tape cannot be ejected after timer recording, turn the AUTO MODE
selector OFF and the KX-800/U's POWER switch ON; the tape can then
be ejected.
• Timer Playback
1. All connections are the same as for timer recording.
2. Turn on the amplifier and adjust the Volume and Tone controls.
3. Set the input mode selector of your amplifier to the Tape mode.
4. Set the timer to the time you wish to start and stop playback.
5. Set the AUTO MODE selector to the TIMER PLAY position.
6. At the preset time, the timer will turn power on to the amplifier and tape
deck and begin playback. it will shut power OFF, at the preset time as
well ending playback.
c::=::=:::J
...
a
Audio timer
To AC outlet
KX-800/U
cS
~dJf
@
[:J
u: .. ·· .... ·
l~!f~r;-;,~":~:.:;.;:::]
;::
:
c~c:;c;
t::J
¢' .-~
~
....= :.: .: ..
~®.~:j6~d
...
!
l~ ~ ..••
I
~~;f'~~,".;,,~~]
:'_"
rtopi=H
0
I
=
~
••• ,.'
"'~~.
-00_'
_._+
_._.
"
--
Tun;r
-.
~'.?_~-~~:-~",,~,:~~j
Amplifier
These functions are activated based on unrecorded tape sections of
specified time. To ensure error-free operation, please follow these
procedures:
• Use tape that is free from static or previously recorded music in the
sections between selections.
• Do not use with tapes that include selections with long silences.
• Do not use with tapes that include selections with low level passages.
• Do not use with tapes of conversations or other recordings with many
interruptions.
When using the AUTO MODE selector in combination with a
commerically available audio timer, it is possible to make recordings and
initiate playback at any time automatically by presetting the deck in
advance.
20
Hide quick links:
Advertisement
Table of Contents
