Table of Contents
Advertisement
Lamp Indication
Green lamp flashing
HOW TO PAIR TERMINAL AND SMART DEVICE
In order to use the smart device with the terminal, it is required to pair the terminal/BCA option unit with smart
device.
When the pairing information of the multiple smart devices is stored in
the terminal, the pairing is made to the smart device that is connected
last with higher priority.
1.
Confirm the Bluetooth function is off. (Connect key lamp is off.) →
2.
Long-Press the Connect key more than 8 seconds. Then, pairing mode is activated.
Keep pressing the Connect key until it flashes red and green alternately,
although it will light red after 3 seconds.
3.
To activate the scan and pair the terminal from the smart device.
Please refer to the manual of the smart device for how to scan and pair
the terminal.
The Bluetooth function will be activated automatically, if you do not make
any operation to the smart device for 120 seconds, after the pairing mode
is started.
ENABLE BLUETOOTH FUNCTION
1.
Long-press the Connect key more than 3 seconds, when Bluetooth function is off.
(Connect key is off.) →
2.
Connect key lights red, and Bluetooth function is activated. →
After starting-up the terminal, Bluetooth function is activated
automatically.
After the Bluetooth function is started, the smart device that has been
connected last is connected through Bluetooth to the terminal.
DISABLE BLUETOOTH FUNCTION
1.
During the Connect key lamp lights red, long-press the Connect key more than 3
seconds.
APPENDIX C PAIRING WITH SMART DEVICE
Function/Connection Status
Smart device have a conversation without via Bluetooth.
83
- Quick Links:
- Voice Mail
- Call Forwarding - All Calls
Hide quick links:
Advertisement
Table of Contents
