Table of Contents
Advertisement
Shows the NAT UDP mapping table.
Transfer Type
Inside IP
Inside Port
Outside Port
Notice: After finish setting, click the Add button to add new mapping table;
click the Delete button to delete the selected mapping table.
Shows the outside WAN port IP address and the inside LAN port IP address.
Notice: 10M/100M adaptive means the network card, and other equipment
physical consultations speed, testing speed under bridge mode near to 100M,
in order to ensure the quality of voice and communications real-time
performance, we made some sacrifices of NAT under the transmission
performance. Transmit with full capability only when system is idle, so
cannot guarantee that the transmission speed reach to 100M.
VPN
8.4.1.4
This web page provides us a safe connect mode by which we can make remote
access to enterprise inner network from public network. That is to say, you can
set it to connect public networks in different areas into inner network via a
special tunnel.
Select the NAT mapping protocol style, TCP or UDP.
Set the IP address of device which is connected to
LAN interface to do NAT mapping.
Set the LAN port of the NAT mapping.
Set the WAN port of the NAT mapping.
- Quick Links:
- Simple Introduction
- Connect to Network
Hide quick links:
Advertisement
Table of Contents
