Serviceable From Top; Serviceable From Rear; Service And Repair; Doors - Thermador PO301 Service Manual
Professional series built-in wall ovens
Hide thumbs
Also See for PO301:
- Use and care manual (120 pages) ,
- Use & care manual (36 pages) ,
- Installation manual (48 pages)
Table of Contents
Advertisement
The User Interface is serviceable from the front after sliding the oven
out from the wall ~ 4 inches.
3.2
Serviceable from Top
The PC Control Module is serviceable from the top access panel after
sliding the oven out from the wall ~16 inches.
With the unit pulled completely away from the wall, the following
components are serviceable from the top after removing the top
panel:
Halogen light transformers
Terminal block
Power supply
3.3
Serviceable from Rear
With the unit pulled completely away from the wall and the back
panel(s) removed, the following components can be serviced from the
rear:
Convection fan motor
Bake element
Cooling fan(s)
Rotisserie motor
4
SERVICE AND REPAIR
CAUTION
m
Sheet metal parts often have sharp edges. Avoid injury by
handling these parts with care.
Turn off the electrical power circuit to the oven at the main junction
box before servicing this unit.
For those checks requiring the use of electrical power, exercise
extreme care.
Service Manual for Thermador Professional Series Built-in Wall Ovens
4.1
Doors
The doors on the double ovens are different, but interchangeable. The
Thermador logo is located on the upper cavity door.
The Pro Series handles are interchangeable with the Masterpiece
Series handles.
CAUTION
m
Avoid injury when removing and replacing oven doors.
Be sure oven is cool enough for handling.
Position hinges properly (see Figure 9).
Grasp only by sides, not by the handle.
Do not force door open or closed.
Handle with care–door weighs ~38 pounds.
4.1.1
Removing and Replacing the Door(s)
To remove the door:
1. Open door completely.
2. Flip hinge levers back to open.
3. Close door until it remains open ~6 inches.
4. Using both hands, lift door up and out.
To replace the door:
1. Position door as if it were open ~6 inches and insert hinges
into slots.
2. Open door completely.
3. Flip hinge levers forward to close.
4. Close and open door to check operation.
Page 7 of 21
Hide quick links:
Advertisement
Table of Contents
