Table of Contents
Advertisement
Lit. No. 94-30-007A
REMOVING THE LAMP TRANSFORMER &
LOWER OVEN DOUBLE LINE BREAK RELAY
WARNING
Turn off the electrical power circuit to the
oven at the main junction box before ser-
vicing this unit.
CAUTION
When you work on the oven, be careful
when handling the sheet metal parts. There
are sharp edges present and you can cut
yourself if you are not careful.
1.
Turn off the electrical power to the oven.
2.
Open the upper oven door.
3.
Remove the control panel and display
head (see Page 11 for the procedure).
4.
Remove the front subpanel (see Page 10).
5.
To remove the lamp transformer (see il-
lustration, below):
a) Remove the screws and disconnect the
wires from the terminals.
b) Install the new lamp transformer and
reconnect the wiring.
6
1
10
Secondary
Winding
5
Primary
Winding
6.
To remove an old oven relay
(see Illustration, below):
a) Remove the screws and disconnect the
wires from the relay terminals.
b) Install the new oven stalled fan relay
with the terminals positioned as shown
and reconnect the wiring.
Upper Yel (102)
Lower Org (112)
Upper Wht (103)
Lower Wht (113)
Upper Blk (104)
Lower Blk (114)
Screw (2)
Douible Line
Break Relay
Front Of Oven
7.
Reassemble the oven.
Page 97
CJ Oven Service Manual
Upper Blk (12)
Lower Blk (92)
- Quick Links:
- Component Locations
- Fault Codes
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
