Table of Contents
Advertisement
Idle Mode
From Idle mode you can:
•
Run an automatic program.
•
Run a manual program.
•
Adjust the temperature.
•
add steam.
•
open and close the vent.
•
change the fan setting.
Running an Automatic Program
1. From Idle mode
2. Wait 3 seconds or press the start key to begin preheat stage.
3. Wait for oven to reach set temperature. The display will show lo or hi and the menu
number. When the set point is reached the buzzer will sound and the display will
show ready
4. Put product into the oven.
5. Close door, bake begins.
6. Pre-Alarm #1
For more details see the Pre-Alarm section.
7. Alarm will sound when bake is finished and display will show
program number
Open the door to end the program, this will hold the current bake temperature, add time
if required by pressing the up button. OR
START
to end the bake and return the holding temperature to 250 °F.
Press cancel
CANCEL
0690S20043
690-NC2
enter the program number (01 - 40) using the keypad
.
will sound if programmed, press
.
START
CANCEL
to cancel the alarm.
. and the
4-2
Advertisement
Table of Contents
