Table of Contents
Advertisement
The following are instructions for editing and creating a menu program.
1. Enter the Program Mode by pressing the up and down keys
simultaneously for 5 seconds.
2. Display shows
3. Key in the menu number you want to program (01-40), or use the up and down keys
to scroll.
Programs 01-20 can hold two stages.
Programs 21-40 hold one stage
4. Press the 'next' key
5. Display will show
enter the preheat temperature. Press the next key
6. Display will show
keys
key
to advance.
7. Display will show
time between 0-30, C2, C3, and C4. C2 produces two cycles of 15 second steam.
C3 produces three cycles etc. Press 'next' key to advance.
8. Display will show
enter the time in minutes and seconds. Press 'next' key to advance.
Example: Enter 1200 for twelve minutes and zero seconds.
9. Display will show
keypad to enter the Temperature between 250°F and 500°F. Press the 'next' key to
advance.
10. Display will show
Hi and Lo fans. Press 'next' key to advance.
0690S20044
690-NC2
PROGRAMMING
for MENU.
to edit/program the first parameter of the menu.
for Pre-Heat. Use the up and down keys or the keypad to
for Temperature Compensation. Use the up and down
to adjust temperature Compensation to on or off. Press the next
for steam. Use the up and down keys to adjust the steam
for stage 1 time. Use up and down keys or keypad to
for stage 1 Temperature. Use up and down keys or
for stage 1 fan. Use up and down keys to scroll between
to advance.
5-1
Advertisement
Table of Contents
