Table of Contents
Advertisement
11. Display will show
(For menus 21-40 skip to the Pre-alarm). Use up and down keys or keypad to enter
the time in whole minutes. Entering 0 will eliminate stage 2 and skip you past the
rest of the stage 2 parameters. Press 'next' key to advance.
12. Display will show
keypad to enter the Temperature. Press the 'next' key to advance.
13. Display will show
Hi and Lo fans. Press 'next' key to advance. Best results are achieved with the fans
on HI.
14. Display will show
Pre-Alarm in whole minutes (0 to 30). Example: A pre alarm value of 1 will sound an
alarm 1 minute before the time expires. Press 'next' key to advance.
15. Display will show
open or 1-14 minutes. Venting example: A vent time of one minute will make the
vent open one minute before the end of the menu program. Press 'next' key to
complete program and return to the menu prompt.
16. Enter the next menu number to be programmed or press cancel to leave
programming mode.
0690S20044
690-NC2
for stage 2 time. Stage 2 only works for menus 01-20
for stage 2 Temperature. Use up and down keys or
for stage 2 fan. Use up and down keys to scroll between
for Pre-Alarm. Use the up and down keys to select the
for Vent. Use the up and down keys to scroll closed,
5-2
Advertisement
Table of Contents
