Table of Contents
Troubleshooting
Related Manuals for Eci Telecom ONT B-FOCuS O-4F2PW
Summary of Contents for Eci Telecom ONT B-FOCuS O-4F2PW
- Page 1 I Telecom Ltd 30 H Hasivim Street, , P.O.Box 500 tach Tikva 4951 17, Israel Tel: +972-3-926-65 555 Fax: +972 -3-928-7100 ww.ecitele.com ONT B-F FOCuS S O-4F2 2PW/O O-4G2P Hardwa are Inst tallatio n Manu...
- Page 2 – section 11: voltage dips, short interruption and voltage variations immunity test EN 61000-3-2:2000/+A2:2005: Limits for harmonic current emissions (equipment input current <=16A per phase) EN 61000-3-3:1995/+A1:2001/+A2:2005: Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current <=16A 02-Oct-2011 ECI Telecom Ltd. Proprietary...
-
Page 3: Table Of Contents
4.2 Login ONU __________________________________________________________________ 13 4.3 Introduction to Configuration Pages _____________________________________________ 14 4.4 Status _______________________________________________________________________ 14 Device Information ____________________________________________________________________ 14 LAN Status ___________________________________________________________________________ 15 iii) WAN Status ________________________________________________________________________ 16 02-Oct-2011 ECI Telecom Ltd. Proprietary... - Page 4 Reboot Device ________________________________________________________________________ 35 Factory Default _____________________________________________________________________ 36 vii) Diagnose ___________________________________________________________________________ 37 viii) Language __________________________________________________________________________ 38 Troubleshooting ____________________________________________________________ 39 5.1 ONT Status LEDs ____________________________________________________________ 39 5.2 Troubleshooting Procedures ____________________________________________________ 42 02-Oct-2011 ECI Telecom Ltd. Proprietary...
-
Page 5: About This Document
B-FOCuS O-4F2PW/O-4G2PW Hardware Installation Manual About This Document Purpose This guide describes how to install the CIG optical network termination unit (ONT) at the customer premises. Intended Audience This document is intended for technicians responsible for: Unpacking and mounting the ONT and power supply Connecting the ONT to the PON network Connecting services to the ONT Chapter Overview... -
Page 6: Product Description
1.2 Services ONT B-FOCuS O-4F2PW/O-4G2PW is equipped with ITU-T G.984 compliant 2.5G Downstream and 1.25G Upstream GPON UPLINK interface, and the following service ports Four 10/100 Base-T Ethernet ports for high speed internet access and IPTV/VOD services Two POTS (VoIP) service ports for voice services Integrated 802.11b/g/n wireless... - Page 7 +12V DC power input Power Supply AC power supply with included power adapter Power < 16W Consumption Table 2 Electrical specification Temperature 0 ~ 40° C Humidity 10 ~ 90% relative humidity Table 3 Environmental specification 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1...
- Page 8 0.5 dBm +5 dBm Digital receiver Wavelength 1480 nm 1490 nm 1500 nm Minimum received power Sensitivity -27 dBm for BER<10-10 Maximum received power Overload -8 dBm for BER<10-10 Table 5 Optical specification 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1...
-
Page 9: Safety
This unit can only be used with the certified adaptor model inside the package, which complies with the requirement of limited power source. DANGER: Do not open the enclosure without permission and technical support, which is dangerous and voids the warranty. 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 10: Laser Safety
Personnel handling fiber optic cables must be trained for laser safety. CAUTION: Do not bend the fiber optic cable to a diameter smaller than 7.5 cm/3 inches. Doing so may damage the fiber or prevent the signal from passing through properly. 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 11: Installation
Look through the diagram below for getting an overview of several parts of the ONT. WLAN Button Reset Button WLANData Encryption Button POTS Interfaces WLAN Antenna Giga/Ethernet Interfaces Power Interface Optical Power Switch Interface Button Figure 2 ONT Elements 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 12: Mountings & Connecting To Network
Align the ONT mounting bracket on the wall. There are two mounting directions, either horizontal (Figure ) or vertical (Figure ). Make sure the install arrows is up when correctly mounted. Mounting Holes Mounting Holes Figure 3 Bracket mounting: Horizontal direction 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... - Page 13 B-FOCuS O-4F2PW/O-4G2PW Hardware Installation Manual Figure 4 Bracket mounting: Vertical direction Mount the bracket into a wall stud by driving the two sheet metal screws into the wall through the bracket mounting holes (Figure ). 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1...
- Page 14 Wrap the fiber optical cable on the fiber storage tray. Make sure the SC/APC connector comes out from the bottom left side in case of horizontal mounting, or left up side in case of vertical mounting. Secure the fiber with the cable holder. 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1...
-
Page 15: Install The Ont On Desktop
If the wire pair is not terminated, follow local practices to attach an RJ-11 connector.. Plug the wire pair with RJ-11 connector into one of the ONT RJ-11 phone jacks. Repeat step 2-3 as needed to connect additional phone lines. 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 16: Connecting Ethernet Service
Repeat step 2-3 as needed to connect additional Ethernet cables. Color Signal Color Signal Orange/White Tx + Blue/White Unused Orange Tx — Green Rx — Green/White Rx + Brown/White Unused Blue Unused Brown Unused Table 7 Ethernet RJ-45 connector wiring pattern 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 17: Verify The Installation
You may be required to provide or confirm the following information about the ONT: vendor, model number, serial number. Once the ONT has been activated in the network, and the LINK LED is lit green, you can proceed to Section 3 .7.2 : Verifying Services. 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 18: Verifying Services
Please use following steps to login the ONU. • Step 1 Open IE browser, enter http://192.168.1.1 (ONU default IP address) in the address bar • Step 2 Enter administrator user name (root) and password (admin) in the login window. 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 19: Introduction To Configuration Pages
After successful login, the default page is “Status”. There are 3 second level selections in “Status” page, they are:”Device Information”, “LAN Status” and “WAN Status”. i) Device Information In “Device Information” page, you can view the Device Name, Serial Number, Hardware Version, Software Version and Device Running Time. 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 20: Ii) Lan Status
For Wireless interface information, you can view the Wireless Status, Wireless Channel, SSID name, and encryption method, etc. • For Ethernet Interfaces information, you can view the Ethernet IP information, MAC address, packet received and transmitted information, etc 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 21: Iii) Wan Status
In “WAN Status” page, you can view the WAN Connection List, Connection Mode, Enable/Disable, VLAN, Link Status, PON Link Status, Up FEC Enable, Down FEC Enable, TX Packets, Rx Packets, Tx Dropped and Rx Dropped. 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 22: Network
Bind MAC Address Bind the specific MAC and IP address for DHCP Bind IP Address Bind the specific MAC and IP address for DHCP Add a MAC to IP binding rule Add Button 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 23: Ii) Wan
“PPPoE”, “DHCP”, and “Static IP”. If PPPoE is selected, it will be requested to WAN IP Mode input username/password, and keep alive time. If Static IP is selected, it will be requested to input the IP address, netmask 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 24: Iii) Wifi
Select working mod. There are below modes: 1) Auto (b/g/n) mode 2) b mode 3) g mode Mode 4) n mode 5) b/g mode 6) B/G/N Hybrid mode 7) N/G Hybrid mode 8) B/G Hybrid mode 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... - Page 25 WPA encryption mode, WPA version and WPA key. 4） WPA/WPA2 Enterprise: It’s needed to input Radius server address, port number and WPA key number. Note: When WPS is enable, encryption mode must be WPA/WPA2 Personal. 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1...
-
Page 26: Iv) Routing
Click this button, to add a new static routing Add Button rule for above parameters. After the configurations are done, click “Save” button to save it. Restart the device to make the modification to take effects 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 27: V) Dns
Add Button Click Add button to add this DNS entry Delete Button Click Delete button to delete this DNS entry After configuration is done, click the “Save” button to save it 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 28: Vi) Tr-069
ITMS server password for ONU to access it. Connect Request Username User name for ITMS Server to access ONU Connect Request Password Password for ITMS Server to access ONU After configuration is done, click the “Save” button to save it. 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 29: Security
Attack Protect Enable or Disable DoS Attack Prevention. DoS is Deny of Service Attact. Enabling this option can increase the network security effectively After the configurations are done, click “Save” button to save it. 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 30: Ii) Mac Filter
Default Policy Including two options: deny, or accept. It’s used for the MACs that can not meet all the filtering rules. After the configurations are done, click “Save” button to save it. 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 31: Iii) Ip Filter
2) TCP 3) UDP 4) TCP/UDP 5) ICMP Add Button Click this button, to add a new filtering rule for above configurations. After the configurations are done, click “Save” button to save it. 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 32: Iv) Dmz And Alg
WAN Connection List Select to use DMZ function on which WAN link Enable or Disable DMZ function Enable DMZ DMZ IP Address Input DMZ host IP address Save DMZ Button Click to save DMZ Configuration 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 33: Application
Enable or Disable mapping between WAN port and LAN port WAN Link List (Virtual Host) Select which WAN link to use port forwarding setup Add Button Create a new mapping rule using above port forwarding setup 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 34: Ii) Ddns
Select available service provider for DDNS service. One can select “DynDNS.org”,“gnudip”,“tzo”,“ods” “TZO”、“ODS”或“GnuDIP” Domain Name Input DDNS Service Provider Domain Name Username Input DDNS account user name Password Input DDNS account password After the configurations are done, click “Save” button to save it. 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 35: Iii) Ntp
Interval Time Time Zone Select the time zone the user is located in After the configurations are done, click “Save” button to save it. Restart the device to make the modification to take effects. 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 36: Maintain
By Password management, one can modify the user password. Below is the description for the parameters: Parameter Description Enter New Password New Password Re-enter new password Re-Enter New Password After the configuration is done, click “Save” button to save it. 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 37: Ii) Slid Configuration
Display the current SLID of ONT Input New SLID Input the new SLID of the ONT SLID Mode Select the SLID mode. There are modes: A After the configuration is done, click “Save” button to save it. 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 38: Iii) Backup And Restore
Below is the description for the parameters Parameter Description Select File Select the configuration file name Import Config File Click to restore system configuration from the file Click to backup system configuration to the file Export Config File 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 39: Iv) Firmware Upgrade
In this page, one can upgrade the ONT firmware. Below is the description for the parameters: Parameter Description Select File Select the firmware file name Upgrade button Click to upgrade the ONT firmware from the file 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 40: V) Reboot Device
B-FOCuS O-4F2PW/O-4G2PW Hardware Installation Manual v) Reboot Device In this page, one can reboot the ONT Below is the description for the parameters: Parameter Description Reboot button Click to reboot the ONT 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 41: Vi) Factory Default
Factory Default In this page, one can reset the configuration to factory default Below is the description for the parameters: Parameter Description Factory Default Click to reset the ONT to factory default 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 42: Vii) Diagnose
Input valid IP address or domain name for user test. Test Select ping test or traceroute test Start Test button Click this button to start the test Show Result button Click this button to show the test result 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 43: Viii) Language
B-FOCuS O-4F2PW/O-4G2PW Hardware Installation Manual viii) Language Below is the description for the parameters: Parameter Description Select the display language Select Language Save button Click to save the language configuration 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... -
Page 44: Troubleshooting
5.1 ONT Status LEDs The ONT status LEDs located on the enclosure (Figure 5) assist with installation and maintenance procedures. These LEDs are described in detail in Table . Figure 5 ONT Status LEDs location 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... - Page 45 Green/Flash Call in On hook Green/Solid Off hook TEL2 Green/Flash Call in On hook Green/Solid VoIP is OK VoIP VOIP is NOT OK Green/Solid "In Progress" and "Success" status "Error" and "Session Overlap" status 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1...
- Page 46 B-FOCuS O-4F2PW/O-4G2PW Hardware Installation Manual LED Name Color Indicates WPS disable Green/Solid Connected WLAN Green/Flash data receive and transfer（2H flash） Error/WLAN is not connected/WLAN diasble Table 8 ONT Status LEDs description 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1...
-
Page 47: Troubleshooting Procedures
Check whether the connection of the telephone cable is correct. The WPS LED is off Check whether the WPS service is started. The WLAN LED is off Check whether the WLAN service is started. Table 9 Troubleshoot procédures 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1... - Page 48 B-FOCuS O-4F2PW/O-4G2PW Hardware Installation Manual 02-Oct-2011 ECI Telecom Ltd. Proprietary Rev 0.1...