Advertisement
Quick Links
Advertisement
Summary of Contents for Airflex AF5D-21
- Page 1 User Manual AF5D-21 2D/3D Multi-Projector Stacking Processor...
- Page 2 Thank you for choosing AF5D-21 passive 3D processor. AF5D-21 is an advanced dual channel passive 3D processor with 10 bits high end scaler and Perfect Sync 3D RH/LH synchronization algorithm. It is a professional grade passive 3D demultiplexer and pure hardware video wall controller without geometry adjustment function.
- Page 3 11. The embedded audio from HDMI input signal can be decoded and output to PC audio output Jack on the front panel. Minimum Equipment required for 3D display 1. 1x AF5D-21 Screen or Chromaflux 3D Screen Paint) 2. 2x Projectors (Native resolution above XGA 5.
- Page 4 2. RH eye should see only “R” and LH eye should see only “L”. If the projector can accept 1080P@24Hz timing, please enable [1080P 24Hz output] to get better video image, otherwise AF5D-21 will output 1080P 60Hz signal. www.airflex5d.com info@airflex5d.com...
- Page 5 1. If it is not the result, then to set [Output Format] in OSD menu is required. 2. Please swap [Left Eye Frame] and [Right Eye Frame] in both RH/LH output channels to see the right “R” & “L” characters in both eyes. 3.
- Page 6 6. During the installation, the distance between the polarizer and the projector should be over 5cm to avoid thermal damage due to high temperature from the projector. Higher lumens projector will create more heat and the distance should be larger. The polarizer can only tolerate up to about 60~70℃. 7.
- Page 7 3D system. Video Wall AF5D-21 has pure hardware video wall function. Each AF5D-21 can handle two image channels with overlap at any individual edge or all edges. It can do image cropping, split and assign the location of each image. The overlap pixel between two images can also be adjusted pixel by pixel so that the video wall can meet the requirements in different application environment.
- Page 8 Press Menu Keypad on Front Panel or remote controller to enter into Video Wall OSD menu Use [Zoom] to split the display in horizontal and vertical directions. AF5D-21 will cut the image into different sections. Maximum split image is 15 in both horizontal and vertical directions.
-
Page 9: Technical Support
An Excel file can be provided for the calculation in different edge blending overlap value for projector edge blending application. Example for video wall with AF5D-21 in LCD displays. Each AF5D-21 can control two video wall displays. Technical support Please check more technical information in www.airflex5D.com. - Page 10 Air ex5D, LLC. info@air ex5D.com www.Air ex5D.com v1.3 11/12...