Section 3 - Configuration
Select your connection type from the My.Internet.Connect.Is drop-down box. Choose Static IP if all of the port's IP information has been provided
by your ISP. You will need to enter the IP address, subnet mask, gateway address, and DNS address(es). Each IP address entered in the fields must
be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
My Internet
Select Static.IP to manually enter the IP settings supplied by your ISP.
Connection Is:
Enable Advanced
DNS Service:
Advanced Domain Name System (DNS) services enhances your Internet
performance by getting you the information and web pages you are looking
for faster and more reliably. In addition, it improves your overall Internet
experience by correcting many common typo mistakes automatically,
taking you where you intended to go and saving you valuable time.
Enable True
Gigabit Routing
Check to enable true Gigabit routing. This will increase the through-put
Connectivity:
of the WAN-LAN connectivity of the router.
IP Address:
Enter the IP address assigned by your ISP.
Subnet Mask:
Enter the Subnet Mask assigned by your ISP.
Default Gateway:
Enter the Gateway assigned by your ISP.
DNS Servers:
The DNS server information will be supplied by your ISP
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your specific ISP. 1500 is the default MTU.
MAC Address:
The default MAC Address is set to the Internet port's physical interface MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by your ISP. You can use the Copy.Your.PC's.MAC.Address button to
replace the Internet port's MAC address with the MAC address of your Ethernet card.
D-Link DIR-865L User Manual
Manual Internet Setup
Static IP
26