Dynamic Ip (Dhcp) - D-Link DIR-865L User Manual
Wireless ac1750 dual band gigabit router
Hide thumbs
Also See for DIR-865L:
- User manual (167 pages) ,
- Quick installation manual (33 pages) ,
- Specifications (3 pages)
Table of Contents
Advertisement
Section 3 - Configuration
If you are unsure what method you use to connect to the Internet, try this first. Cable modems usually use this type of connection
My Internet
Select Dynamic.IP.(DHCP) to obtain IP Address information automatically
Connection:
from your ISP. Select this option if your ISP does not give you any IP
numbers to use. This option is commonly used for cable modem services.
Enable Advanced
Advanced Domain Name System (DNS) services enhances your Internet
DNS Service:
performance by getting you the information and web pages you are looking
for faster and more reliably. In addition, it improves your overall Internet
experience by correcting many common typo mistakes automatically,
taking you where you intended to go and saving you valuable time.
Disclaimer: D-Link makes no warranty as to the availability, reliability,
functionality and operation of the Advanced DNS service or its features.
Enable True
Gigabit Routing
Check to enable true Gigabit routing. This will increase the through-put of the WAN-LAN connectivity of the router.
Connectivity:
The Host Name is optional but may be required by some ISPs. Leave blank if you are not sure.
Host Name:
Check the box if you are having problems obtaining an IP address from your ISP.
Use Unicasting:
Enter the Primary and secondary DNS server IP addresses assigned by your ISP. These addresses are usually obtained automatically
from your ISP. Leave at 0.0.0.0 if you did not specifically receive these from your ISP.
Primary/Secondary
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default
DNS Server:
MTU.
MTU:
The default MAC Address is set to the Internet port's physical interface MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by your ISP. You can use the Copy.Your.PC's.MAC.Address button to
replace the Internet port's MAC address with the MAC address of your Ethernet card.
MAC Address:
D-Link DIR-865L User Manual
Dynamic IP (DHCP)
27
Advertisement
Table of Contents
