Ipv6 Firewall - D-Link DIR-865L User Manual
Wireless ac1750 dual band gigabit router
Hide thumbs
Also See for DIR-865L:
- User manual (167 pages) ,
- Quick installation manual (33 pages) ,
- Specifications (3 pages)
Table of Contents
Advertisement
Section 3 - Configuration
The DIR-865L's IPv6 Firewall feature allows you to configure which kind of IPv6 traffic is allowed to pass through the device. The DIR-865L's IPv6
Firewall functions in a similar way to the IP Filters feature.
Enable IPv6 Simple
Security:
Check the box to enable the IPv6 firewall simple security.
Configure IPv6
Firewall:
Select an action from the drop-down menu.
Name:
Enter a name to identify the IPv6 firewall rule.
Schedule:
Use the drop-down menu to select the time schedule that the
IPv6 Firewall Rule will be enabled on. The schedule may be set
to Always, which will allow the particular service to always
be enabled. You can create your own times in the Tools >
Schedules section.
Source:
Use the Source drop-down menu to specify the interface that
connects to the source IPv6 addresses of the firewall rule.
IP Address Range:
Enter the source IPv6 address range in the adjacent IP Address
Range field.
Destination:
Use the Destination drop-down menu to specify the interface
that connects to the destination IP addresses of the firewall rule.
Protocol:
Select the protocol of the firewall port (All, TCP, UDP, or ICMP).
Port Range:
Enter the first port of the range that will be used for the firewall
rule in the first box and enter the last port in the field in the
second box.
D-Link DIR-865L User Manual
IPv6 Firewall
88
Advertisement
Table of Contents
