Table of Contents
Advertisement
Trouble shooting (continued)
Problem
Recording does not
start although power is
supplied to this unit and
the SD card is correctly
inserted.
Motion picture
recording stops
suddenly.
Auto focus function
does not work.
A sentence is displayed
in the screen centre.
A function indication
such as mode
indication, remaining
time indication, or time
code indication is not
shown.
Sound is not played
back from the built-in
speaker of this unit.
104
VQT0X49
≥ Has the SD card's write protect switch been set to
[LOCK]?
> No recording is possible while the write protect switch is
set to [LOCK]. (P17)
≥ Is the SD card's memory full?
> If the card has no more available memory, free up some
memory by copying some scenes to a PC (P84) and then
deleting unnecessary scenes (P66).
≥ Is the unit set to the motion picture recording mode or
still picture recording mode?
> No recording is possible unless the mode dial is at
or
. (P23)
≥ Is the card slot cover open?
> If the card slot cover is open, this unit may not operate
normally. Close the card slot cover. (P16)
≥ Can the SD card be used for motion picture recording?
> Use an SD card that can be used for motion picture
recording. (P37, 38)
≥ Is manual focus mode selected?
> If auto mode is selected, focus is automatically adjusted.
(P35)
≥ Are you trying to record a scene which is hard to bring
into focus in auto focus mode?
> There are some recording subjects and surroundings for
which the auto focus does not operate correctly. (P109) If
so, use the manual focus mode to adjust the focus. (P49)
≥ Is the colour night view set?
> When the colour night view is working, focusing shifts
into the manual mode. (P46)
≥ Read the contents and respond to them. (P99)
≥ If you set [SETUP]>[DISPLAY]>[OFF], indications
other than warnings and date indications disappear.
≥ Is the volume too low?
> During playback, move the volume lever to display the
volume indication and adjust it. (P62)
Check points
Advertisement
Table of Contents
