Table of Contents
Advertisement
Cleaning and care
Automatic rinsing
Preparing the rinsing process
42
Automatic rinsing cleans the steam generator of mineral
deposits from vaporised water.
After water throughput of approx. 3 litres, the water in the
steam generator is drained into the residual water drawer the
next time the appliance is switched on.
The rinsing process lasts for a few minutes.
You will recognise the rinsing process has been activated
after switching on when the indicator light on the iron does
not illuminate, the iron does not heat up and steam cannot
be used.
Water is drained into the residual water drawer. While it is
doing this, some steam may be released and burbling
noises can be heard.
No other function can be used while the rinsing process is
running.
Only after automatic rinsing has finished is the steam
ironing system ready to use again.
^ Adjust the steam ironing system to its highest working
position (see 'Height adjustment') so that the residual water
drawer can be removed later.
^ If the indicator light k illuminates after switching on the
appliance, you need to fill the water container (see 'Filling
the water container').
^ If the indicator light 2 illuminates after switching on, empty
and refit the residual water drawer.
Hide quick links:
Advertisement
Table of Contents
