Table of Contents
Advertisement
Figure 2 shows PortChannel designs.
Note:
automatically redistributed across the remaining links in the PortChannel fabric interface.
Figure 2.
Configuring a Fabric PortChannel
1.
Log into the first parent switch and enter into configuration mode.
Nexus 5000 Switch
login: admin
Password:
Cisco Nexus Operating System (NX-OS) Software
TAC support:
Copyright (c) 2002-2011, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php
http://www.opensource.org/licenses/lgpl-2.1.php
N5548-Bottom# configure terminal
Enter configuration commands, one per line.
N5548-Bottom(config)#
2.
Enable the fabric extender feature.
N5548-Bottom(config)#
N5548-Bottom(config)# feature fex
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
A fabric interface that fails in the PortChannel does not trigger a change to the host interfaces. Traffic is
PortChannel Designs
http://www.cisco.com/tac
and
End with CNTL/Z.
Page 8 of 41
- Quick Links:
- Network Diagram
- Hardware Installation
Hide quick links:
Advertisement
Table of Contents
