4 Replacement Procedures
4.31 LCD unit/Touch panel/Digitizer
Removing the LCD unit/Touch panel/Digitizer
The following describes the procedure for removing the LCD unit/touch panel/digitizer. (See
Figure 4-51 to 4-55.)
1. Turn the display clockwise180 degrees and close the display on the palm rest cover.
2. Peel off the mask seals (9 points) from the LCD mask and remove the following
screws securing the LCD mask.
3. Insert your fingers into the slits on both sides and remove the LCD mask while
releasing the latches.
LCD mask
M2.5x6.0B FLAT HEAD
(with mask seal)
4-80
Downloaded from LpManual.com Manuals
M2.56.0B
FLAT HEAD screw
M2.5x6.0B FLAT H
(with mask seal)
Figure 4-51 Removing the LCD mask
[CONFIDENTIAL]
4.31 LCD unit/Touch panel/Digitizer
EAD
M2.5x6.0B FLAT HEAD
(with mask seal)
PORTÉGÉ M780 Maintenance Manual (960-809)
9
Slit