Related Manuals for Yeastar Technology MyPBX U500
Summary of Contents for Yeastar Technology MyPBX U500
- Page 1 MyPBX U500 Installation Guide MyPBX U500 Installation Guide Version: V1.0 Yeastar Technology Co., Ltd Date: 25 , July, 2012 http://www.yeastar.com 1/13...
-
Page 2: Table Of Contents
3.2.3 Connection of FXS ports ....................9 3.2.4 Power Connection ......................9 3.2.5 Overall Flow Chart ......................10 4. MYPBX U500 BASIC CONFIGURATIONS ..................10 4.1 Factory Defaults ....................... 10 4.2 Logging in the Web Configuration Panel ................. 10 4.3 Network Settings ......................11 4.4 Extensions Setup and management ................. -
Page 3: Preparation Before Installation
This Guide explains how to install MyPBX U500, how to configure MyPBX U500 via web interface, how to add extensions, and make/receive calls via PSTN lines. -
Page 4: Hardware Specifications
MyPBX U500 Installation Guide Screws 8 screws (φ3.0*6mm) for mounting ears; 4 screws (φ3.0*8mm) for hard disk brackets Sheet 1 MyPBX U500 Packing List 2. Hardware Specifications 2.1 Overview Figure 2-1 MyPBX U500 2.2 LED Indicators and Ports Figure 2-2 MyPBX U500 Front Panel http://www.yeastar.com... - Page 5 MyPBX U500 Installation Guide Figure 2-3 MyPBX U500 Back Panel Indication Status Description Power Power status The power is switched on The power is switched off MyPBX status Blinking MyPBX is running properly Not Blinking/Off MyPBX goes wrong 1-16 FXO port status Red light The red light is blinking: the PSTN line hasn’t been...
-
Page 6: Specifications And Operating Environment
MyPBX U500. 3.1 Placement Instructions Ambient Temperature: to avoid overheating, please do not run MyPBX U500 in the place where the ambient temperature is above 122℉ (50℃). Ventilation: please make sure that the device has good ventilation around. -
Page 7: Installation Instructions
ADSL modem. LAN Port Connection Connect one end of a network cable to the LAN port of MyPBX U500, and the other end to any port of company’s LAN switch/router. If the LAN port is connected to PC directly (not via a switch), please use cross-over cable. - Page 8 MyPBX U500 Installation Guide If No.3 and No.7 connectors are GSM/UMTS Ports, the steps of connection are as below: Step 1: Open the Upper case of MyPBX U500 Step 2: Insert the SIM card: Figure 3-2 Inserting the SIM Card Step 3: Connect the antenna Once completed, the No.3 and No.7 LED lights would turn red as below figure:...
-
Page 9: Connection Of Fxs Ports
Once users have made sure that device installation, cable connection and power type is correct, please switch on the power. Then MyPBX U500 will start booting. In the meantime, users would see that the ‘POWER’ and ‘RUN’ indicator lights would turn on. -
Page 10: Overall Flow Chart
Figure 3-6 Overall Flow Chart 4. MyPBX U500 Basic Configurations 4.1 Factory Defaults MyPBX U500 provides web-based configuration interface for administrator and account user. The user can manage the device by log in the web interface. The factory default IP address: LAN: 192.168.5.150;... -
Page 11: Network Settings
MyPBX U500 Installation Guide Figure 4-1 MyPBX Web Configuration Panel Login Page Enter the Admin User Name and Password to log in. Figure 4-2 MyPBX Admin Configuration Interface Via the configuration interface, the admin can make all the system configurations, including network settings (LAN, WAN, Firewall, VPN, DDNS, VLAN, etc.);... -
Page 12: Extensions Setup And Management
MyPBX U500 Installation Guide just configuring the IP address of the LAN port which is connected to the local area network of the company is OK. WAN Settings Click “Network Settings”->”WAN Settings” on the left menu bar. 1. If the network that the WAN port is connected to is using DHCP server as connection method, please select the “DHCP”... -
Page 13: Making/Receiving Calls
Note: After resetting, all the configurations made by the admin would be erased. 5. Conclusion This Installation Guide only explains the installation and basic settings of MyPBX U500 for making and receiving calls. For more functionality and advanced settings of MyPBX U500, please refer to the relative documents as below: “MyPBX U500 Datasheet”...