Table of Contents
Advertisement
Section 3 - Configuration
Select Static IP Address if all the Internet port's IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask,
gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which
are four octets separated by a dot (x.x.x.x). The router will not accept the IP address if it is not in this format. After modifying any settings, click Save.
Settings to save your changes.
Failover Internet Type Is:
IP Address:
Subnet Mask:
Default Gateway:
Primary / Secondary
DNS Servers:
MTU:
MAC Address:
D-Link DWR-925 User Manual
Manual Internet Connection Setup
Static IP (assigned by ISP)
This will display the failover Internet type, if available.
Enter the IP address assigned by your ISP.
Enter the subnet mask assigned by your ISP.
Enter the gateway assigned by your ISP.
The DNS server information will be supplied by your ISP (Internet
Service Provider.)
Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your specific ISP. 1500 is the
default MTU.
The default MAC address is set to the Internet port's physical
interface MAC address on the broadband router. It is not
recommended that you change the default MAC address unless
required by your ISP. You can use the Clone button to replace
the Internet port's MAC address with the MAC address of your
Ethernet card.
14
Hide quick links:
Advertisement
Table of Contents
