Table of Contents
Advertisement
Installation
(continued)
Installation Procedures (When Using Mounting Collar )
29
Use the brackets supplied with your car when mounting this unit. The bracket shape and mounting method vary with car
manufacturers, car types and manufacturing year. Please consult your nearest dealer or installer.
Select mounting screws according to the hole positions and hole shape of the bracket.
Round Head Screw (5 mm6 mm)
Recycle the Round Head Screws that fi xed the transportation brackets for
two more positions.
Round Head Screw (4 mm3 mm)
4 pieces
Flat-Head Screw (5 mm6 mm)
Use the supplied Spacer if mounting hole of your car is shaped like below.
Mounting Hole
of a Bracket (in
section)
Bracket
Round Head Screw
Spacer
(5 mm6 mm)
Double-Faced Adhesive Tape
Existing Bracket (L) (Bracket originally attached to the car)
To Remove the Unit
Push the right and left clamp plates outward, one at
a time, and pull the unit toward yourself.
Push here to
remove the
clamp plates.
To remove Trim Plate , pull it from right side to left side.
30
CY-VM7203W
2 pieces
When using these
mounting holes
4 pieces
Round Head Screw (5 mm6 mm)
Spacer
Existing Bracket (R)
Double-Faced
Adhesive Tape
After removing the right and left clamp plates, pull
the unit with both hands till it comes out.
Connecting the Parking Brake (Side Brake) Connection Lead
Caution
For safety, be sure to ask your nearest professional
installer to do this connection.
Hand brake
The parking brake (side brake) switch position varies with the car
model. For details on the exact location of the parking brake (side brake)
switch in your car, contact your dealer.
Clip Connector
Parking Brake (Side Brake) Connection
Lead
(Bright green)
When the parking brake (side brake) lever
is engaged, the unit is grounded by the
chassis.
Attach a Clip Connector to the end of the parking
brake (side brake) connection lead.
Come up to this point.
Parking Brake (Side Brake)
Connection Lead
(Bright green)
Parking brake (side brake)
switch
Foot brake
Battery
Car chassis
Brake light
The Clip Connector is connected to the power
source side lead of the parking brake (side brake)
lever.
Power source side lead
CY-VM7203W
30
31
Advertisement
Table of Contents
