Table of Contents
Advertisement
To use Dynamic DNS, you will need perform the following steps:
1) Make sure that the LAN interface of the DKVM-IP1 is properly configured.
2) Create an account with a DDNS service provider and set up a hostname for the DKVM-IP1 to
use. You will need the username and password for your DDNS account as well as the
hostname you will use.
3) Open the DKVM-IP1's web GUI and click Device Settings > Dynamic DNS to open the
Dynamic DNS Setings page.
4) Enable Dynamic DNS and enter the required settings, as described below. After making your
changes, click the Apply button to save your changes.
Enable Dynamic DNS
This enables the Dynamic DNS service. This requires you to have configured a DNS server's
IP address in Device Settings > Network.
Dynamic DNS server
This is the address of the DDNS service the DKVM-IP1 will use. Currently, this is a fixed
setting as only dyndns.org is currently supported.
DNS System
Choose Dynamic for free DNS service. Customize this for your own domain.
91
Advertisement
Table of Contents
Troubleshooting
