Table of Contents
Advertisement
Default PIN code can change depending on the
selected country.
If you are asked to enter a PIN code for viewing a
menu option, use one of the following codes: 4725,
0000 or 1234.
Press OK button on the remote control to continue and the
following message will be displayed on the screen.
You can activate Store mode option by using "
button. If Store Mode is selected, Store mode option will be
available in other settings menu and your TV's features will
be illustrated on the top of the screen. A confi rmation
screen will be displayed after selecting the Store
Mode. Select YES to proceed.
If Home Mode is selected, Store mode will not be
available after the First Time Installation. Press OK
button on the remote control to continue and the following
message will be displayed on the screen.
You must select a search type to search and store
broadcasts from the desired source.
Aerial Installation
If you select AERIAL option from the Search Type
screen, the television will search for digital terrestrial
TV broadcasts.
NOTE: You can press MENU button to cancel.
After all the available stations are stored, Channel
List will be displayed on the screen. If you like the
sort channels, according to the LCN(*), please select
"Yes" and than press OK.
A01_[GB]_mb95_4847uk_DVBT_C_S2_DLNA_HBBTV_MMH_32205LED_39205LED_GOLD19_10081423-10081425-10082975-10083449_50231035_basic IB.indd 13
A01_[GB]_mb95_4847uk_DVBT_C_S2_DLNA_HBBTV_MMH_32205LED_39205LED_GOLD19_10081423-10081425-10082975-10083449_50231035_basic IB.indd 13
" or "
"
Press OK button to quit channel list and watch TV.
(*) LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel sequence.
Cable Installation
If you select CABLE option and press OK button on
the remote control to continue, the following message
will be displayed on the screen:
To continue please select YES and press OK. To
cancel operation, select NO and press OK.
*
You can select frequency ranges from this screen. For
highlighting lines you see, use "
You can enter the frequency range manually by using
the numeric buttons on the remote control.
Set Start and Stop Frequency as desired by using
numeric buttons on the remote control.
English - 13 -
" or "
" button.
29.01.2013 18:37:52
29.01.2013 18:37:52
Advertisement
Table of Contents
