Check before reporting malfunction
Check again if the following phenomenon occurs, which you presume that it is malfunction. It may not be malfunction indeed.
Symptoms
TV screen display is interrupted from
Q
time to time, or not displayed properly.
Check whether the power of the transmission unit is turned on.
A
First, check whether the power LED in the transmission unit flashes in red color. Then, move the location of the
A
transmission unit to the center of the house or the position where you watch the TV most frequently.
A
Check whether the distance from wireless TV and computer is too far away.
Reception sensitivity differs according to the direction of the wireless TV and wireless
A
transmission unit. Turn the front side of the wireless transmission unit towards the wireless TV.
A
Reception sensitivity of the wireless TV also depends on the direction. Find the optimal
direction and location inside the house and install the wireless TV.
A
Do not attach the wireless transmission unit on the bookshelf or the wall to extend the wireless
network coverage.
A
If the TV is turned on properly but not the TV broadcasting, check TV antenna connection and set the channel using
the [Ez Scan] function.
(See page 30.)
Take the following measures
Front
Wireless transmission unit
65