Hitachi CP-X9110 User Manual page 38
Hide thumbs
Also See for CP-X9110:
- User manual (129 pages) ,
- Network manual (109 pages) ,
- Quick setup manual (16 pages)
Table of Contents
Advertisement
Operating
2. SETUP
2.1 Superimpose projected images from two projectors
Select SETUP with ▲/▼ buttons and press ►, ENTER or Input button.
Select 4 Corner with ▲/▼/◄/► buttons and press ENTER or Input button.
Adjust 4 Corner with ▲/▼/◄/► buttons to superimpose projected images from
two projectors.
Press ENTER or Input button again to adjust other corners.
Adjust them referring to the guide displayed during the adjustment.
* Adjust them so that two projected images can be superimposed with over 200 dots.
2.2 Specifying Blending Region
Select one of the four sides with ▲/▼/◄/► buttons and press ENTER or Input
button. Blending Region can be specifi ed for left and right sides with ◄/► but-
tons and for top and bottom sides with ▲/▼ buttons.
Specify Blending Region for each of two projectors.
Adjust them referring to the guide displayed during the adjustment of Blending
Region.
* When one of the sides of Blending Region is other than [OFF], other sides of
Blending Region cannot be adjusted.
* The minimum value of Blending Region is 200 dots.
*
Blending Region of two projectors can be set at a time by just setting Blending
Region of one projector. Refer to Instant Stack Guide for details.
38
Blend Region
Left Image
Guide line
Left Image
Right Image
Right Image
Hide quick links:
Advertisement
Table of Contents
