Lenovo ThinkPad Edge E420 Hardware Maintenance Manual page 79
Hide thumbs
Also See for ThinkPad Edge E420:
- (218 pages) ,
- Benutzerhandbuch (214 pages) ,
- Manual d'utilisation (208 pages)
Table of Contents
Advertisement
Note: If the test shows that the HDD Active Protection System is not functioning, be sure to document the drop
in any reject report, and replace the system board.
• Avoid rough handling of any kind.
• At every point in the process, be sure not to drop or stack the system board.
• If you put a system board down, be sure to put it only on a padded surface such as an ESD mat or a corrugated
conductive surface.
After replacing the system board, run PC-Doctor for DOS to make sure that the HDD Active Protection System
still functions. The procedure is as follows:
1. Place the computer on a horizontal surface.
2. Run Diagnostics ➙ ThinkPad Devices ➙ HDD Active Protection Test.
Attention: Do not apply physical shock to the computer while the test is running.
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 54
•
"1020 ExpressCard blank bezel" on page 55
•
"1030 Bottom slot cover" on page 56
•
"1040 Optical drive or travel cover" on page 57
•
"1060 Hard disk drive assembly" on page 59
•
"1070 PCI Express Mini Card for wireless LAN" on page 61
•
"1080 PCI Express Mini Card for wireless WAN" on page 62
•
"1080 mSATA solid state drive" on page 63
•
"1090 Backup battery" on page 64
•
"1110 Keyboard" on page 65
•
"1120 Top case assembly" on page 66
•
"1130 Bluetooth daughter card" on page 69
•
"1140 Express sub card" on page 70
•
"1150 Speaker assembly" on page 71
Table 23. Removal steps of system board
The following components soldered on the top side of the system board are extremely sensitive. When you service
the system board, avoid any kind of rough handling.
a
CPU
b
Platform Controller Hub (PCH)
c
Graphics Processing Unit (GPU) (Discrete Graphics chip)
For models with a discrete thermal module
.
Chapter 8
Removing and replacing a FRU
73
Advertisement
Table of Contents
