Table of Contents
Advertisement
Loading Envelopes into the Auxiliary Tray
Note
Many applications allow you to specify the input tray you want to use. This
value will override any value set at the printer. If your application does not let
you pick an input tray, use the Paper Menu to select the tray.
To select the auxiliary tray, set SOURCE to AUXTRAY, (see "Selecting The
Default Input Tray" on page 48).
Use the following procedure to load envelopes into the auxiliary tray:
1. See "Selecting Paper and Other Printable Material" on page 25 and "Auxiliary
Tray Paper Specifications" on page 27 for information on media you can load.
2. Gently pull the latch on the top of the tray to open it.
3. Adjust the paper guide to fit the envelope you intend to use.
4. Insert the envelopes into the auxiliary tray until they touch the stopper at the far
end of the tray. Place the print side of the envelopes face up. (The flap side
Chapter 4. Paper Handling
39
Advertisement
Table of Contents
