IBM x3250 M3 Problem Determination And Service Manual page 156
Hide thumbs
Also See for x3250 M3:
- Installation and user manual (102 pages) ,
- Product manual (37 pages) ,
- Manual (32 pages)
Table of Contents
Advertisement
CAUTION:
When replacing the lithium battery, use only IBM Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer. If your system has
a module containing a lithium battery, replace it only with the same module
type made by the same manufacturer. The battery contains lithium and can
explode if not properly used, handled, or disposed of.
Do not:
v Throw or immerse into water
v Heat to more than 100°C (212°F)
v Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
To install the replacement battery, complete the following steps:
1. Follow any special handling and installation instructions that come with the
2. Insert the new battery:
3. Make sure that the riser-card assembly is fully seated in the connectors on the
4. If the riser-card assembly is an optional PCI-X riser-card assembly, make sure
5. Install the riser-card assembly if you removed it (see "Installing the riser-card
6. Install the cover (see "Installing the cover" on page 130).
7. Slide the server into the rack.
8. Reconnect the external cables; then, reconnect the power cords and turn on the
138
IBM System x3250 M3 Types 4251, 4252, and 4261: Problem Determination and Service Guide
replacement battery.
a. Orient the battery so that the positive side faces up.
b. Tilt the battery so that you can insert it into the socket on the side opposite
the battery clip.
c. Press the battery down into the socket until it clicks into place. Make sure
that the battery clip holds the battery securely.
system board.
PCI-X slot
that the riser-card power cable is connected to the riser-card assembly.
assembly" on page 134).
peripheral devices and the server.
Power cable
Hide quick links:
Advertisement
Table of Contents
