Lock The Device; Memory Card Security - Nokia E52 User Manual
Hide thumbs
Also See for E52:
- User manual (193 pages) ,
- Service schematics (30 pages) ,
- Service manual (26 pages)
Table of Contents
Advertisement
Lock the device
The lock code protects your device against unauthorised use. The preset code is 12345.
To lock the device, in the home screen, press the power key, and select
To unlock your device, select
To change the lock code, select
Security
Phone and SIM
>
new code can be 4-255 characters long. Both alphabets and digits can be used, and both
uppercase and lowercase alphabets are possible.
Write down the new code, and keep it secret and in a safe place separate from your
device. If you forget the lock code and your device is locked, you must take the device
to a Nokia authorised service facility and additional charges may apply. To unlock the
device, the software must be reloaded, and the data you have saved in the device may
be lost.
You can also lock the device remotely by sending a text message to the device. To enable
remote locking, and to define the text for the message, select
Settings
and
General
Enabled. Enter the remote lock message, and confirm the message. The message must
be at least 5 characters long. Write down the text, as you may need it later.
Memory card security
Select
Menu
Office
>
You can protect a memory card with a password to prevent unauthorised access.
To set a password, select
be up to 8 characters long and is case-sensitive. The password is stored in your device.
You do not need to enter it again while you use the memory card on the same device.
If you use the memory card on another device, you are asked for the password. Not all
memory cards support password protection.
To remove the memory card password, select
Remove. When you remove the password, the data on the memory card is not protected
against unauthorised use.
To open a locked memory card, select
password.
Unlock
> OK, enter the lock code, and select OK.
Menu
>
card. Enter the old code and then the new code twice. The
Security
Phone and SIM card
>
>
File
mgr..
>
Options
Memory card password
>
Options
Security and data management 149
Ctrl. panel
Settings
>
Options
>
Unlock memory
>
Lock
and
General
Menu
Ctrl. panel
>
Remote phone locking
>
> Set. The password can
Memory card password
card. Enter the
phone.
>
>
>
>
Advertisement
Table of Contents
Troubleshooting
