154 Security and data management
Access point — Select the access point to use for the connection, or create a new access
point. You can also choose to be asked for the access point every time you start a
connection. This setting is available only if you have selected
type.
Host address — Enter the web address of the configuration server.
Port — Enter the port number of the server.
User name and Password — Enter your user ID and password for the configuration
server.
Allow configuration — Select
session.
Auto-accept all requests — Select
confirmation when it initiates a configuration session.
Network authentication — Select whether to use http authentication.
Network user name and Network password — Enter your user ID and password for
the http authentication. This setting is available only if you have selected
authentication
to be used.
To connect to the server and receive configuration settings for your device, select
Options
Start
>
To view the configuration log of the selected profile, select
To update the device software over the air, select
update does not erase your settings. When you receive the update package on your
device, follow the instructions on the display. Your device is restarted once the
installation is complete.
Downloading software updates may involve the transmission of large amounts of data
(network service).
Make sure that the device battery has enough power, or connect the charger before
starting the update.
Warning:
If you install a software update, you cannot use the device, even to make emergency
calls, until the installation is completed and the device is restarted.
Yes
configuration.
to allow the server to initiate a configuration
Yes
if you do not want the server to ask for your
Options
Internet
as the bearer
Network
Options
View
>
Check for
updates. The
>
log.