Nokia E52 User Manual page 172
Hide thumbs
Also See for E52:
- User manual (193 pages) ,
- Service schematics (30 pages) ,
- Service manual (26 pages)
Table of Contents
Advertisement
172 Settings
To use the device as a packet data modem for your computer, select
enter the access point name provided by your service provider.
To use a high-speed data connection, select
WLAN settings
Select
Menu
Ctrl. panel
>
To have an indicator displayed when there is a wireless LAN (WLAN) available in your
current location, select
To select the interval for your device to scan for available WLANs, and to update the
indicator, select
Scan for
WLAN availability
To set the device to test the internet capability of the selected WLAN automatically, to
ask for permission every time, or to never perform the connectivity test, select
connectivity test
Run automatically
the connectivity test is performed successfully, the access point is saved to internet
destinations.
To check the unique media access control (MAC) address that identifies your device,
enter *#62209526# in the home screen. The MAC address is displayed.
Advanced WLAN settings
Select
Options
>
defined automatically, and changing them is not recommended.
To edit the settings manually, select
the following:
Long retry limit — Enter the maximum number of transmission attempts if the device
does not receive a receiving acknowledgement signal from the network.
Short retry limit — Enter the maximum number of transmission attempts if the device
does not receive a clear-to-send signal from the network.
RTS threshold — Select the data packet size at which the WLAN access point device
issues a request to send before sending the packet.
TX power level — Select the power level of your device when sending data.
Radio measurements — Enable or disable the radio measurements.
Settings
>
Show WLAN availability
networks. This setting is not available unless you select
> Yes.
Run
automatically,
>
or allow the test to be performed when the device asks for it, and
Advanced
settings. The advanced WLAN settings are normally
High speed packet access
and
Connection
> Yes.
Ask every
time, or
Automatic configuration
Access
> Enabled.
Wireless
LAN.
>
Never
run. If you select
> Disabled, and define
point, and
Show
Internet
Advertisement
Table of Contents
Troubleshooting
