Nokia E52 User Manual page 174
Hide thumbs
Also See for E52:
- User manual (193 pages) ,
- Service schematics (30 pages) ,
- Service manual (26 pages)
Table of Contents
Advertisement
174 Settings
802.1x security settings
Select
802.1x
as the WLAN security mode.
802.1x
authenticates and authorises devices to access a wireless network, and prevents
access if the authorisation process fails.
Select
WLAN security settings
WPA/WPA2 — Select
secret key used for device identification).
EAP plug-in settings — If you selected
defined in your device to use with the access point.
Pre-shared key — If you selected
private key that identifies your device to the WLAN to which you connect.
WPA security settings
Select
WPA/WPA2
Select
WLAN security settings
WPA/WPA2 — Select
secret key used for device identification).
EAP plug-in settings — If you select
defined in your device to use with the access point.
Pre-shared key — If you select
private key that identifies your device to the WLAN to which you connect.
WPA2 only mode — To allow both TKIP and AES (Advanced Encryption Standard)
encryption, select Off. To allow AES only, select
Wireless LAN plugins
Select
Menu
Ctrl. panel
>
point group.
The extensible authentication protocol (EAP) plug-ins are used in wireless networks to
authenticate wireless devices and authentication servers, and the different EAP plug-
ins make possible the use of various EAP methods (network service).
You can view the EAP plug-ins currently installed in your device (network service).
EAP plug-ins
1
To define the EAP plug-in settings, select
an access point that uses WLAN as a data bearer.
2
Select
802.1x
3
Select
WLAN security settings
and from the following:
EAP
(Extensible Authentication Protocol) or
WPA/WPA2
as the WLAN security mode.
and from the following:
EAP
(Extensible Authentication Protocol) or
WPA/WPA2
Settings
>
or
WPA/WPA2
as the security mode.
WPA/WPA2
Pre-shared
>
WPA/WPA2
> EAP, select which EAP plug-ins
Pre-shared
>
On
and
Connection
Options
WPA/WPA2
EAP
>
>
Pre-shared key
> EAP, select which EAP plug-ins
key, enter the shared
Pre-shared key
key, enter the shared
> Destinations, and an access
New access point
>
EAP plug-in
>
(a
(a
and define
settings.
Advertisement
Table of Contents
Troubleshooting
