Table of Contents
Advertisement
Automation
Glide frames:
Rollback threshold frames:
In Mix show:
Latched Match and Play
Talkback
Talkback switches are:
Listen switch is:
Red light switch is:
TB switches disable Listen:
TB to FB:
See Communications for more details of these options
Monitor section
Monitor Gain Display:
Monitor Set CAL level:
See Monitor Level Display and Calibrated listening level for more details of these options
Solo Gain boost:
Isolated channels AFL on solo:
Desk Setup
Input Cut Enable:
Analogue Meter Scaling:
AWS 924-948 Owner's Manual
Sets the ramp time in frames for the automation SNAP mode. (range 0 - 255)
Sets the number of consecutive frames that the system needs to see to
determine if a Rollback has taken place. The range is 2 - 10; the default is 2.
Increase as required if a Rollback occurs when you stop the timecode master.
When using the automation, you have a choice of what is displayed on the
console's channel scribble strips (and below the Group and Master fader
levels in the Centre Section TFT screen). The choices are:
Automation Mode: displays the status of the faders – Auto, Safe or Manual;
Channel names in Mix running: displays the channel names once Execute is
pressed in automation,
Channel names: displays the channels names regardless.
(ON/OFF) Normally Match and Play are automatically deselected after a Cut
switch is operated. This option latches the Match or Play function until
deselected manually.
Select the operation of the talkback buttons: Momentary / Latching / Auto
(Play) / Auto (Record).
Select the operation of the Listen buttons: Latching / Auto (Play) / Auto
(Record).
Select the operation of the Red Light: Manual / Auto (Play) / Auto (Record).
This allows the Listen function to be switched off when talkback is activated,
thus avoiding feedback problems.
(Sums / Replaces) When assigning talkback to foldbacks, this option defines
whether talkback sums with or replaces the normal foldback signal.
The calibration of the main monitor Gain pot and display can be set to one
of three industry-standard monitoring modes: Music (Off to 11) / Film (Off
to 95dB) / Gain (Off to 0dB)
When in Film mode, adjust the calibrated listening level: 70 - 90 (dB).
Automatically increases the monitor level when a SOLO or AFL is activated
(Range: 0-10dB).
Set solo-isolated channels to automatically solo in AFL (ON/OFF).
If set ON, the channel strip CUT button will cut prefade sends, ie. Aux and
CHOP sends (ON / OFF).
Set the analogue level corresponding to 0dBfs on the console meters. (Range
18, 20, 22, 24 dBu).
Analogue Operations
Page 3-29
- Quick Links:
- Audio Connections
Hide quick links:
Advertisement
Chapters
Table of Contents
