Table of Contents
Advertisement
Level Control
The 100mm fader at the bottom of the channel strip controls the channel send to the Rec and Mix busses,
as well as any other sends which are operating post-fader.
Note that in DAW focus mode, this function can be assigned to the channel V-pot by pressing the
CHANNEL button in the centre section.
AWS 948
The channel fader controls both components of a stereo signal. The relative level of the components (the
balance) can be adjusted using the V-pot.
For In-line Track mode, the main fader controls the secondary channel path (monitor path), and the
V-pot controls the primary channel path. In In-line Mix mode the channel fader controls the primary
path and the V-pot the secondary path. The controls can be flipped between channel paths by pressing
on the V-pot.
Selected Faders can all be set to 0dB using the Function keys: with none of the upper row of buttons
selected, press the 0dB softkey in the bottom row.
The analogue faders can be automated using SSL's automation system, or using A-FADA which allows
your DAW automation to control the analogue faders. When in DAW Focus, the fader is used to control
the track fader within the DAW.
See Section 4 for more information on DAW control, and Section 7 for more information on SSL automation
and A-FADA.
AWS 924-948 Owner's Manual
Analogue Operations
924 and 948
Page 3-13
- Quick Links:
- Audio Connections
Hide quick links:
Advertisement
Chapters
Table of Contents
