5. Remove the screw that secures the storage-drive bracket. Then, push the storage-drive bracket with the
storage drive as shown to remove it from the storage-drive connector on the system board.
Figure 15. Removing the storage-drive bracket with the storage drive
6. Remove the four screws that secure the storage drive to the bracket. Then, push the storage drive as
shown to remove it from the bracket.
Note: Do not touch the circuit board on the bottom of the storage drive.
Figure 16. Removing the storage drive from the bracket
7. To install the new storage drive, insert the new storage drive into the storage-drive bracket so that the
four screw holes in the storage drive align with the corresponding holes in the bracket. Then, install the
four screws to secure the storage drive to the bracket.
8. Connect the bracket with the new storage drive to the storage-drive connector on the system board so
that the screw hole in the bracket aligns with the corresponding hole in the chassis. Then, install the
screw to secure the bracket with the storage drive to the chassis.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 127.
Replacing the internal speakers
This section provides instructions on how to replace the internal speakers.
104
ThinkCentre E63z User Guide