3. Position the computer cover into place and then tighten the two screws
Figure 52. Installing the computer cover
4. Install the frame stand. See "Removing and installing the frame stand" on page 99.
5. If a Kensington-style cable lock is available, lock the computer cover. See "Attaching a Kensington-style
cable lock" on page 56
6. Connect the external cables and the ac power adapter to the computer.
7. Depending on the parts you installed or replaced, you might need to confirm the updated information in
the Setup Utility program. Refer to "Using the Setup Utility program" on page 59.
Note: In most areas of the world, Lenovo requires the return of the defective Customer Replaceable Unit
(CRU). Information about this will come with the CRU or will come a few days after the CRU arrives.
Obtaining device drivers
You can obtain device drivers that are not preinstalled in your operating system at
http://www.lenovo.com/support. Installation instructions are provided in readme files with the device-driver
files.
128
ThinkCentre E63z User Guide
1
to secure the computer cover.