Installing The Humidistat - Honeywell HE360 Installation Kit

Hide thumbs Also See for HE360:

Table of Contents

Available languages

HE360 HUMIDIFIER AND INSTALLATION KIT

Installing the Humidistat

Installing on Mounting Duct

1. Apply the template to the duct location chosen for the humidistat. Make

sure the template is level before drilling the holes.

2. Refer to the template (provided with the H8908 Humidistat Installation

Instructions) to drill the control assembly opening and mounting holes for

the H8908.

3. Remove the H8908 case from the base.

4. Position the foam gasket on the H8908 base.

5. Position the base on the duct with the arrow up.

6. Secure the base to the duct using the four

1 in. (25 mm) mounting screws provided with humidistat.

7. Connect the low-voltage wires to the leads and replace the H8908 case. See

Fig. 12.

NOTE: For wall mounting instructions, see the H8908 Installation Instructions.

WIRING

CAUTION

Hazardous Voltage.

Can cause personal injury or equipment damage.

Disconnect power supply before installing or servicing equipment.

69-2631ES—01

HUMIDISTAT BASE

WIRE SLOT

Fig. 12. Humidistat base and rear view.

REAR OF HUMIDISTAT

HUMIDISTAT WIRES

M20179

Table of Contents

Show Quick Links

Table of Contents