free hit counter

Exposure Control; Exposure Time - Takenaka System TL-2048UFD Instruction Manual

Line scan camera
Table of Contents

Advertisement

6.

Exposure control

It can switch the exposure mode between three types of exposure modes by setting
panel of the camera
① Line period exposure
Exposure during each period of EXT.SYNC
② Fixed time exposure
Exposure during the period of the equation below from the timing of leading edge of EXT.SYNC.
Exposure time=25.6μsec×N+40clk
③ Pulse width exposure
Exposure during the period of the pulse width of EXT.SYNC
Exposure time=H period of EXT SYNC+40clk-6clk
<EXP control switch>
Dial
reading
0
1
E
F
EXP setting N=0
EXP setting N=1~E
EXP setting N=F
Mode
LINE
Exposure during each period of EXT.SYNC
FIX1
Exposure time:25.6μs x 1+1μs
FIX14
Exposure time:25.6μs x 14+1μs
PULSE
Exposure during the period of the pulse width(H) of EXT.SYNC
Contents
6 / 9
EXP switch on the rear

Advertisement

Table of Contents
loading