Summary of Contents for ZKaccess ZKIP472
- Page 1 User’s Manual for ZKIP4 Series Cube IP Camera Document Version: 1.7 Date: 2012.12 Introduction This document mainly introduces the functional features, installation process and access methods of ZKIP4 series IPC.
- Page 2 Important Notices Thanks for selecting our company’s IPC. Before use, please read through the user’s guide to avoid any unnecessary damage! All functions depend on the actual product. Since the product is subject to updating, our company is not responsible for any difference from this guide and not liable for any dispute over different technical parameters from this guide.
-
Page 3: Table Of Contents
Table of Contents Table of Contents 1 Overview........................ 1 1.1 Product Description ..................1 1.2 Product Features ..................1 1.3 Technical Parameters ................... 2 1.4 Product Appearance ..................4 1.5 Connecting Terminal ..................6 1.6 Basic Procedure ................... 7 2 Installation and Network Configuration ............8 2.1 Hardware Installation ................... -
Page 5: Overview
Overview 1 Overview 1.1 Product Description ZKIP4 series products are cube IP cameras for day/night use. With small and exquisite design and providing high-quality monitoring, they are a type of affordable and applicable indoor network camera. The perfect hardware and software design strengthens the performance stability while ensuring function realization. -
Page 6: Technical Parameters
HD cam to support the browsing by 10 users simultaneously, 5 in primary code stream and 5 in secondary code stream 1.3 Technical Parameters Product Model ZKIP472 Product Name Cube IP Camera Cam Properties Image Sensor 1/3" megapixel progressive wide dynamic CMOS sensor Image Resolution WDR HD 1280×720... - Page 7 Overview Minimum Illumination 0.01 Lux (IR lamp is off), 0 Lux (IR lamp is on) Day/Night Switch ≥100db Wide Dynamic Range ≥60db(AGC OFF，Weight On) Lens 6mm fixed lens One built-in dot-matrix infrared lamp, with effective projection IR Distance distance of 10-15 m and projection angle of 60 degrees Video Coding Primary Processor Hi3512...
-
Page 8: Product Appearance
User’s Manual for ZKIP4 Series Cube IP Camera V1.7 10Base-T/100Base-TX Ethernet interface Network Interface WiFi 802.11b/g Wireless network (optimal) Supported Network TCP/IP, HTTP, TCP, ICMP, UDP, ARP, IGMP, SMTP, FTP, DHCP, Protocols DNS, DDNS, NTP, UPNP, RTSP and etc. Working Environment DC 12V, ≥1A Input Power POE Ethernet power supply: comply with 802.3af regulation (optional) - Page 9 Overview Dimensional Drawing (in mm) Front View Right View...
-
Page 10: Connecting Terminal
User’s Manual for ZKIP4 Series Cube IP Camera V1.7 1.5 Connecting Terminal Power Interface: Connect to the adapter. This IPC employs the power supply of DC 12V and no lower than 1A. Do not use any different power supply as it may damage the camera. -
Page 11: Basic Procedure
Overview TF card slot (TF CARD): Supports TF card local storage for video recording and snap, up to 32G(Optional). 1.6 Basic Procedure Unpack and check whether any component is missing; Connect the camera to computer by means of patch cable; If your computer IP is in a network section different from camera IP, please set it to the same network section as camera IP, such as, 192.168.1.87. -
Page 12: Installation And Network Configuration
User’s Manual for ZKIP4 Series Cube IP Camera V1.7 2 Installation and Network Configuration 2.1 Hardware Installation Installation Notices: Read through the guide for installation prior to installation. Check whether any component is missing against the packing list, if yes, please contact your supplier. - Page 13 Installation and Network Configuration Use the standard power cord when the power supply is too far away from the camera, and consider the voltage drop caused by long distance. Read through the instructions for connecting terminal and wire strictly according to interfaces. Any damage to the camera due to improper operation will be disqualified from the guarantee.
-
Page 14: Network Connection
User’s Manual for ZKIP4 Series Cube IP Camera V1.7 Schematic Diagrams of Installation (Unit: mm) Fix the self-provided support on a (horizontal or vertical) plane as require. Connect the camera, and then fix the camera on the support after adjusting the angle. - Page 15 Installation and Network Configuration Notice: 1) The default IP address is “192.168.1.88” and the default HTTP port is 80. If needed to change IP address or port, refer to Network Setting in WEB Server User Manual. 2) If the device is in a network section different from computer, refer to How to Visit IPC on Internet in WEB Server User Manual for the connection during different network sections.
-
Page 16: Accessing Device
User’s Manual for ZKIP4 Series Cube IP Camera V1.7 3 Accessing device There are 4 methods can be used to access the device: Browser, RTSP Media Player, Mobile Device and Video Surveillance Software (ZKiVision client software). 3.1 Using WEB Browser Open a browser, type in the dynamic domain name or IP address of the device (e.g. -
Page 17: Using Rtsp Media Player
Accessing device Note: When accessing the device via browser for the first time, it is necessary to download the control. More details about how to use browser for video surveillance, please refer to WEB Server User Manual in the supplied CD. 3.2 Using RTSP Media Player Download and install a media player supporting RTSP protocol, e.g. - Page 18 User’s Manual for ZKIP4 Series Cube IP Camera V1.7 Type in the network URL in the form of rtsp://<IP address>:<RTSP port>/<stream code>. Click “Play” and the media player will play the real-time video of the device.
-
Page 19: Using Mobile Devices
Accessing device Note: 1) The default RTSP port of device is 554. If it must be modified, please refer to WEB Server User Manual in the supplied CD. 2) If it is necessary to learn about how to use RTSP media player for video surveillance, please refer to WEB Server User Manual in the supplied CD. - Page 20 User’s Manual for ZKIP4 Series Cube IP Camera V1.7 Choose “Device List” and click “Add” to add devices, type in the user name, password, domain name and port of the device, click “Save” to complete it.
-
Page 21: Using Video Surveillance Software
Accessing device Choose “Live View” on the initial interface, click the cell and click again to select the device to play its live video. Note: 1) The operating system of mobile device must be Android or iOS or BlackBerry. 2) As the internet service is required for watching video, please consult with your internet service provider for specific charges. - Page 22 User’s Manual for ZKIP4 Series Cube IP Camera V1.7 monitoring can be started. If needed to learn about how to use the video surveillance software, refer to ZKiVision Client Software User Guide in the CD.