Installing Memory; Installing Dimms - IBM 6339 User Manual

Hide thumbs Also See for 6339:

Table of Contents

Installing memory

See the following illustration for the location of parts on the system board.

1 Fan connector

2 Microprocessor

3 DIMM 1

4 DIMM 2

5 Power connector

6 Power connector

7 Hard disk LED connector

8 Power LED connector

9 Diskette connector

10 Secondary IDE connector

Your computer has two connectors for installing dual in-line memory modules

(DIMMs) that provide up to a maximum of 512 MB of system memory.

When installing DIMMs, the following rules apply:

v Fill each system memory connector sequentially, starting at DIMM 1

v Use 3.3 V, synchronous, 168-pin, unbuffered, 133 MHz nonparity synchronous

dynamic random access memory (SDRAM)

v Use 32 MB, 64 MB, 128 MB, or 256 MB DIMMs in any combination

v DIMM heights of 38.1 mm (1.5 inches)

To install a DIMM:

1. Remove the cover. See "Removing the cover" on page 29.

11 Primary IDE connector

12 Front USB connector

13 Clear CMOS/BIOS recovery jumper

14 Battery

15 PCI slot

16 PCI slot

17 PCI slot

18 CD-ROM audio connector

19 Front panel connector

Chapter 4. Installing internal options — desktop model

Table of Contents