Installing Adapters - IBM 6339 User Manual

Hide thumbs Also See for 6339:

Table of Contents

Installing adapters

User Guide

2. You might have to remove an adapter to gain access to the DIMM slots. See

"Installing adapters".

3. To locate the DIMM connectors. See "Identifying parts on the system board" on

page 44.

4. Open the retaining clips.

5. Make sure the notches in the DIMM align with the tabs on the connector. Push

or insert the DIMM straight down into the connector until the retaining clips

close.

What to do next:

v Replace any adapters that were removed.

v Replace the power supply.

v To work with another option, go to the appropriate section.

v To complete the installation, go to "Replacing the cover and connecting the

cables" on page 52.

This section provides information and instructions for installing and removing

adapters. Your computer has three expansion slots for peripheral component

interconnect (PCI) adapters. You can install an adapter up to 330 mm (13 inches)

long.

To install an adapter:

1. Remove the cover. See "Removing the cover" on page 41.

Notches

Table of Contents