IBM 6339 User Manual page 64

Hide thumbs Also See for 6339:

Table of Contents

3. Position the cover over the chassis so that the front edge is approximately one

inch away from the front bezel.

4. Lower the cover down over the chassis so that the rail guides engage the rails.

5. Slide the cover forward. You might need to lift the front of the cover slightly to

align it properly.

6. Insert the three thumbscrews into the holes in the cover and the chassis and

tighten.

7. Reconnect the external cables and cords to the computer. See "Chapter 2.

Installing external options" on page 11

8. To update the configuration, see "Chapter 6. Updating the computer

configuration" on page 55.

Important:

When the power cord is first plugged in, the computer might appear to

power on for a few seconds, then power off. This is a normal sequence to

enable the computer to initialize.

Chapter 5. Installing internal options — microtower model

Table of Contents

6346 6341 6342 6348 2256 2257 ... Show all