Message
See "Error messages"
(page 186).
Problem
An error occurred
(except "0050 NO
REC RF").
Message
0050 NO REC RF
Problem
• Recording error
occurred.
• RF signals cannot be
detected.
• Video head clogging
or failure in recording
system.
Message
–
Problem
Near tape end.
Message
–
Problem
Tape end.
Message
–
Problem
Battery is almost
c)
exhausted.
Message
–
Problem
Battery is exhausted.
a) Flashes only during recording.
b) Output only during recording.
c) You can use the battery level/external power display
in the control panel display (see page 26 and page 29),
on the viewfinder screen, on an external monitor, and
184
Warning System
Tally indicator
Operation on the VTR
module
Continues operation or
stops, depending on the
type of error.
Tally indicator
a)
Operation on the VTR
module
Recording continues, but
the results may be invalid.
Tally indicator
Operation on the VTR
module
Operation continues.
Tally indicator
Operation on the VTR
module
Recording, playback, and
fast forward stop.
Tally indicator
Operation on the VTR
module
Operation continues.
Tally indicator
Operation on the VTR
module
c)
Operation stops.
Warning tone
Action to take
Check the error message, and resolve the condition,
referring to the "Description" column in the table of
"Error messages" (page 186). Or contact a Sony service
representative.
If a slack error occurs, refer to the maintenance manual
and remove the cassette, or contact a Sony service
representative.
Warning tone
b)
Action to take
Clean the video heads.
If recording fails after head cleaning, turn off the power
and contact a Sony service representative.
Warning tone
–
Action to take
Prepare an exchange cassette.
Warning tone
–
Action to take
Exchange the cassette, or rewind the tape.
Warning tone
–
Action to take
Exchange the battery.
Warning tone
–
Action to take
Exchange the battery.
in the subdisplay to check the state of the battery (see
page 50 and page 67).
Alarm tone
–
Alarm tone
–
Alarm tone
b)
Alarm tone
Alarm tone
b)
Alarm tone