P68 Maintenance - Cleaning The Feed System; To Clean Out Fines - Harman P68 Installation & Operating Manual

Hide thumbs Also See for P68:

Table of Contents

P68 Maintenance - cleaning the Feed System

Pellet fines will accumulate in the feeder body over

a period of time; therefore, a yearly inspection and

cleaning of this must be performed.

To clean out fines:

1. Remove right rear cover panel.

. Remove wing nut and feeder cover on the right

side of the feeder.

3. Use a vacuum cleaner to remove all fines.

4. Reinstall feed cover, wing nut, and right rear

cover panel.

Pellet Fines may build up in this area

The low draft sensor switch monitors the air

pressure in the hopper. Depending on the amount

of fines in the fuel being burned, this fitting, known

as the muffler, may need to be cleaned periodically.

Note the location of the muffler and use caution

when cleaning or emptying the hopper.

P68 Pellet Stove

5/16" Hex Head

Screws (2 on

each side)

Fig. 39

5/16" Hex Head

Screws (2 on

each side)

Table of Contents

Show Quick Links

Table of Contents