Installing The Hood Latch (Ce Only) - Toro Groundsmaster 4500-D Operator's Manual
Toro groundsmaster 4500-d; groundsmaster 4700-d traction unit, mower
Hide thumbs
Also See for Groundsmaster 4500-D:
- Service manual (474 pages) ,
- Operator's manual (92 pages) ,
- Installation instructions manual (28 pages)
Table of Contents
Advertisement
1
Installing the Hood Latch (CE
Only)
Parts needed for this procedure:
1
Lock bracket
2
Rivet
1
Washer
1
Screw, 1/4 x 2 inches
1
Locknut, 1/4 inch
Procedure
1. Unhook the hood latch from the hood latch bracket.
2. Remove the (2) rivets securing the hood latch bracket
to the hood
(Figure
from the hood.
2
1. Hood latch bracket
3. While aligning the mounting holes, position the CE
lock bracket and the hood latch bracket onto the hood.
The lock bracket must be against the hood
Do not remove bolt and nut assembly from the lock
bracket arm.
3). Remove the hood latch bracket
1
G012628
Figure 3
2. Rivets
(Figure
1. CE lock bracket
4. Align the washers with the holes on the inside of the
hood.
5. Rivet the brackets and the washers to the hood
4).
6. Hook the latch onto the hood latch bracket
1
1. Hood latch
7. Screw the bolt into the other arm of hood lock bracket
to lock the latch in position
securely but do not tighten nut.
3
4).
2
1. Bolt
2. Nut
13
1
2
G012629
Figure 4
2. Bolt and nut assembly
G012630
Figure 5
(Figure
6). Tighten bolt
1
G012631
Figure 6
3. Arm of hood lock bracket
(Figure
(Figure
5).
Hide quick links:
Advertisement
Table of Contents
