System Information; Auto Standby; Software License Information; Auto Display - Sony HT-RT5 Operating Instructions Manual
Home theatre system
Hide thumbs
Also See for HT-RT5:
- Operating instructions manual (287 pages) ,
- Startup manual (2 pages) ,
- Startup manual (2 pages)
Table of Contents
Advertisement
[On]: Always output signals from the
HDMI OUT (ARC) jack when the system is
in standby mode. If you connect a TV
other than "BRAVIA," we recommend you
to select this setting.
[Off]: No signals are output when system
is in standby mode. This setting saves
power in the standby mode compared to
the [On] setting.
[HDMI1 Audio Input Mode] (Europe
models only)
You can select the audio input of the
device that is connected to the HDMI IN 1
jack.
[HDMI1]: The sound of the device that is
connected to the HDMI IN 1 jack is input
from the HDMI IN 1 jack.
[TV]: The sound of the device that is
connected to the HDMI IN 1 jack is input
from the DIGITAL IN (TV) jack.
[Quick Start/Network Standby]
[On]: Shortens the startup time from
standby mode. You can operate the
system quickly after turning it on.
[Off]: Off
[Auto Standby]
[On]: Turns on the [Auto Standby]
function. When you do not operate the
system for about 20 minutes, the system
enters standby mode automatically.
[Off]: Off
[Auto Display]
[On]: Automatically displays information
on the TV screen when changing the
audio signals, picture mode, etc.
[Off]: Displays information only when you
press DISPLAY.
[Software Update Notification]
[On]: Sets the system to inform you of
latest software version information
(page 24).
[Off]: Off
[Auto Update Settings]
[Auto Update]
28
GB
[On]: Software update is executed during
2-5 a.m. local time following the set [Time
Zone], and is performed when this system
is not in use. If the [Quick Start/Network
Standby] setting is set to [Off], updating is
performed immediately after the system
is turned off.
[Off]: Off
[Time Zone]
Select your region/city.
Note
• Depending on the content of the software
update, even though [Auto Update] is set to
[Off], updating may be performed.
[Device Name]
You can change the name of this system
according to your preference so that it is
more recognizable when using the
[Bluetooth Audio] or [Screen mirroring]
function. The name is also used with
other networks, such as the home
network. Follow on-screen instructions
and use the software keyboard to enter
the name.
[System Information]
You can display the system's software
version information and the MAC address.
[Software License Information]
You can display the Software License
Information.
[Network Settings]
[Internet Settings]
Connect the system to the network
beforehand.
[Wired Setup]: Select this when you
connect to a broadband router using a
LAN cable.
[Wireless Setup(built-in)]: Select this
when you use the built-in Wi-Fi function
of the system to connect to a wireless
network.
Hide quick links:
Advertisement
Table of Contents
