Table of Contents
Advertisement
ENR-1000 Series System Administrator's Manual
LAN 2 Port
LAN2 port is a typical Ethernet port. You will have to use this port to connect with a different
network segment when your system requires (1) the connection with a remote PC client or
network cameras, (2) the use of event-triggered e-mail service via an external SMTP server
(3) the use of date/time synchronization with external NTP server.
By default, once connecting to a network, it will first try to get an IP address assigned by your
network router from DHCP server. If your network does not assign IP address automatically,
then LAN2 port will assume IP address 192.168.1.10.
Connection Setting Example 2
The diagram below displays a connection setting example using LAN1 + LAN2 to connect
networks cameras within different network segments.
In this setting, ENR with three cameras are within the same network segment, while there is
another camera locating in another network. In addition, this system requires the connection
with an external SMTP server and a remote client.
LAN2: DHCP client
(EX:172.16.26.100)
SMTP Server
Remote PC Client
LAN1: 192.168.0.10
(EX:172.16.26.101)
(EX:192.168.0.101 ~ 192.168.0.103)
You may check and modify the network configurations by going to Live screen select
"Setup" click Network tab. (For detailed configuration instructions, please refer to Network
Settings on page 52).
25
www.acti.com
Hide quick links:
Advertisement
Table of Contents
