Table of Contents
Advertisement
ENR-1000 Series System Administrator's Manual
Network Settings
There are two network interface cards in ENR. Either of these cards can be supported by the
built-in DHCP server feature, which enables ENR to assign IP addresses to cameras via
LAN1 or LAN2 port without another DHCP on router.
Go to Setup page Network tab
The current settings of both LANs will be displayed here.
By default, LAN1 card is set to Manual mode with a fixed IP address 192.168.0.10, while
LAN2 is in DHCP client mode. It is suggested that you connect LAN1 to LAN and connect
LAN2 to WAN.
52
www.acti.com
Hide quick links:
Advertisement
Table of Contents
